Hfj13 Hydraulic Tunneling Jumbo Drilling Rig

• After-sales Service: 1years
• Warranty: 1years
• Certification: CE, ISO 9001:2000, ISO 9001:2008
• Condition: New
• Motor: DC Motor
• Drill Hole Diameter: >300mm
• Model NO.: HFJ13
• Drill Hole Depth: <100m
• Bit Type: Diamond Bit
• Drilling Way: Impactor
• Perforation Range: 45-89 mm
• Diesel Engine: Cummins OSB3.9 - C100-31
• Main Motor Power: 55 Kw
• Pump Pressure and Displacement: 12bar 4 M³/H
• Total Length of The Propeller: 5, 500 mm
• Climbing Angles: 20°
• Water Consumption: 0.7 - 2 L / Min
• Walking Speed: 12/4.5km/H
• Work End Face Size: 10, 902*1, 650*2, 100/2, 690mm

Product Description

Product features
Hanfa Group underground tunneling series of drilling RIGS are widely used for underground mining, small tunnel tunneling and bolt hole reinforcement projects. Their well-designed shape, configuration, system control and other aspects will provide customers with a better perforation experience.

1.HFJ13 tunneling trolley is widely used in underground mine development, small tunnel tunneling, and bolt hole reinforcement engineering.The well-designed HFJ13 will provide customers with a better perforation experience in terms of appearance, configuration, system control and other aspects.The chassis and lifting safety ceiling based on safety considerations ensure the passability and stability of the equipment, so that the operator can always work in a safe position;"Direct" positioning of the drill arm system to achieve rapid and accurate positioning of the hole;The power of the HF104M drilling machine can reach 20KW, and its frequency of 60Hz is a strong guarantee for efficient drilling. The double-buffer shock absorption system and automatic drilling adaptation system can not only improve the penetration efficiency, but also effectively reduce the consumption of drilling tools and improve the production efficiency. 2.Hydraulic rock drilling control system, with automatic hole opening, no lubrication, no water, no impact, rotary pressure automatic control push, push pressure automatic control impact and automatic anti-stick drill functions;Walking before and after two speed shift, overload climbing, the engine does not shut off, automatically adapt to reduce speed and increase output torque;The electrical system USES THE CAN communication connection technology, the module divides the area layout design, the simplification circuit, enhances the reliability;Unique hole bottom slag flushing function, clean drilling, convenient charging.

3.Heavy-duty aluminum alloy propulsive beam with high flexural and torsional strength and long service life;The surface of the propelling beam is covered with stainless steel, and teflon wear-resistant gasket is used between the moving parts to improve the service life.

4.The double two Angle suspension support drill arm can ensure the accurate hydraulic parallel holding function in all directions;Heavy-duty telescopic boom, with the most dispersed stresses such as bending, shear and torsion, box structure, bearing capacity of more than 1.5 tons.

Perforation range	45-89 mm
Drill pipe specification	T38-H35 R32/3,700mm
Wiertarka skalna model	HF104M
Diesel Engine	Cummins OSB3.9-C80-31
Diesel engine power	60 kW@2,200 rpm
Main motor power	55 kW
Pump pressure and displacement	12bar 4 m³/h
Air compressor pressure and displacement	8bar 0.3m³/min
Total length of the propeller	5,500 mm
Walking speed	12/4.5km/h
Climbing angles	14°
Driving turning radius	Inner R2,800mm outer R4,900mm
Work end face size (width × height)	6,600x5,670 mm
Maximum working area	35 m²
Dimension (L x W x H)	10,902*1,650*2,100/2,690mm
Weight	≤12.17T