Suppliers with verified business licenses
Audited Supplier Factory Direct Sale Hfdx-5 Surface Mining Exploration Core Drilling Rig With ISO 9001:2000
General Introduction:
The HFDX-5 new model Full Hydraulic Core Drill Rig is developed with advanced technique of same kind equipments at home and abroad. The drill rig has a reasonable design and superior performance. It is easy for operation and maintenance.
Overall Unit Features
The drill rig adopts full hydraulic driving, tire trail-type. The drill head is driven by variable motor with function of two-speed mechanical gear shifts, stepless speed change with an advanced and simple structure. The system has the function. If the piston rods of oil cylinder moving one certain distance, the drill head moving will double the distance. The mast could be adjusted within the range of angle 0 to 90 degree for its drilling hole with a low center of gravity and good stability of the overall unit. The rig provides operator with a nice field of vision and wide and comfortable working condition. TheHFDX-5looks pretty in overall structure and embodies the design thought of people oriented.
1) Reliable Performance
Basing on the guideline of purchasing the critical auxiliary equipment internationally, the diesel engine,
the hydraulic pump, the main valves, the motors, crawler reducers and the key hydraulic spare parts are all adopted famous brands products at home and abroad.
2) High Efficiency
With big torque, high power unit allocation and with reasonable structure design and advanced operation method and 6 meters(19.7 feet) length of drill rod, all these guarantee the drill rig's high operation and performance efficiency.
3) Environmental Protection
With lower polluting emission of diesel engine, professional noise reducing design, the drill rig is fully
suitable for urban operation and performance.
4) Energy Saving
Adopting the advanced load sensitive control technique, the drill rig has reduced the power consumption and heat generation to the lowest level.
Field of Application
HFDX-5 Type Drill Rig is mainly used for inclined and straight holes drilling. It could be used for exploration and prospecting of geology, metallurgy, coal, nuke industry, hydrology and in other industries fields. It is a core drilling rig by using diamond and carbide-tipped bits mainly.
| Diesel Engine | Model | Cummins 6CT A8.3-C195 (turbocharged and charge water cooled) |
| Displacement | 8.3L (2.19 US Gallons) | |
| Power | 145kW (195HP) | |
| Rated RPM(Factory setting) | 2200rpm | |
| Drilling Capacity | BQ | 1500 m(4920 feet) |
| NQ | 1300 m(4264 feet) | |
| HQ | 1000 m(3280 feet) | |
| PQ | 680 m(2230 feet) | |
| Drill Head | Rotation Motor | Double Hydraulic Motors -variable and Reversible Maker:SAUER-DANFOSS |
| RPM | Two Shifts/ Step less Change 0-1145 RPM | |
| Ratios | 1st 8.776:1 2nd 2.716:1 | |
| Head Opener | Side wise sliding way with hydraulic drive | |
| Hydraulic Chuck(PQ) | Hydraulically opened, Disc Spring Clamping, Normally Closed Type Axial Holding Capacity of 222 400 N | |
| Max. Torque | 4650 N·m(3427 lbf·ft) | |
| Hold Diameter | 121 mm(4.76 inch) | |
| Max. Lifting capacity of Spindle | 150 kN(33720 lbf) | |
| Max. Feeding Power | 75 kN(16860 lbf) |
| Primary Pump Package | Axial Piston variable displacement Triplex pump for driving of Drill Head Rotation, Main Hoist, Mud Pump & Line Winch. | Maker: DANFOSS 1st Pump:150LPM at 28.5MPa 2nd Pump:120LPM at 25MPa 3rd Pump: 102 LPM at 25MPa |
| Hydraulic Tank | Capacity | 420 L (111 US Gallons) |
| Capacity of Main Hoist | Hoisting Speed (single wire) | 38-70m/min(bare drum) |
| Hoisting force (single wire) | 77kN(17310 lbf) | |
| Steel Wire Diameter | 18 mm(0.71 inch) | |
| Steel Wire Length | 50 m(164 feet) | |
| Capacity of Wire line Hoist | Hoisting Speed (single wire) | 164m/min (bare drum) |
| Hoisting Force (single wire) | 12 kN(2698 lbf) (bare drum) | |
| Steel Wire Diameter | 6 mm(0.24 inch) | |
| Steel Wire Length | 1500 m(4920 feet) | |
| Mast | Mast Height | 11 m(36 feet) |
| Mast Adjusting Angle | 0°-90° | |
| Drilling Angle | 45°-90° | |
| Feeding Stroke | 3800 mm(150 inch) | |
| Slippage Stroke | 1500 mm(59 inch) | |
| Feed Pull | 15000kg(33075 lb) | |
| Feed Thrust | 7500kg(16538 lb) | |
| Rod Pull | 3m or 6m(9.84feet or 19.68feet) | |
| Mud Pump | Type | Reciprocating Pump Triplex Plunger |
| Model | BW250 | |
| Stroke | 100mm(3.9 inch) | |
| Output volume | 250,145, 90, 52 L/min (66, 38, 24, 14 US Gallons/min) | |
| Discharge pressure | 2.5, 4.5, 6.0, 6.0 Mpa (363, 653, 870, 870 psi) | |
| Foot Clamp | Clamping Scope | 55.5-117.5 mm(2.19-4.63 inch) through hole Ф154mm(6.06 inch) |
1. Are you a trading company or a manufacturer?
We are a professional manufacturer. Our factory mainly produces water well drilling rigs, core drilling rigs, down-the-hole drilling rigs, pile drivers, etc. The products have been exported to hundreds of countries around the world and enjoy a high reputation all over the world.
2. How is the quality of your machine?
Our products pass strict quality inspections before they leave the factory to ensure that they are qualified before they are shipped.
3. How to inspect the goods?
1) Support customers to come to the factory for on-site inspection.
2) Support customers to designate third-party companies to inspect goods.
3) Support video inspection.
4. Do you have after-sales service?
Yes, we have a dedicated service team that will provide you with professional technical guidance. If you need, we can send our engineers to your workplace and provide training for your employees.
5. How about quality assurance?
We provide a one-year quality guarantee for the main machine of the machine.
6. How long is your delivery cycle?
1) In the case of stock, we can deliver the machine within 7 days.
2) Under standard production, we can deliver the machine within 15-20 days.
3) In the case of customization, we can deliver the machine within 20-25 days.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}