Hanfa Hfg-21j Hydraulic Surface Professional Jumbo Drill for Sale

Product Description

Product Description

The Main Features:

Applicable for blast hole drilling of underground mining, tunneling and bolting operation.
Function Configuration:
Equipped with environment friendly diesel engine to drive tramming and positioning, electrical motor to drive drilling operation, the dual power configuration allows the rig for fast maneuverability and zero emission with very low noise level of drilling operation. The rig is also equipped with high efficiency hydraulic drifter and heavy duty floating and steady combo boom drilling system, with high accurate automatic horizontal positioning and 360 rotating function, which allows the rig to finish 35 m2 face drilling coverage in one operation and also can be used for bolting and many other applications.
Tramming:
With high pressure and closed cycle hydraulic system to drive four wheels, for two speed transmission while moving forward and backward. With engine non stop when overloaded and climbing slopes, the rig will automatically adjust to lower speed with higher torque output. The two loop circuitry pedal braking system plus emergency braking device can ensure tramming safety. With only width of 1.65 m of ultra-narrow articulated heavy duty chassis design, the minimum turning radius is 2.8m with 14 degree climbility and tramming speed up to 12 km/h and the rig aims to drill blast holes in underground mines and tunneling excavation as well as bolting operation with professional narrow design in mind.

 

Control System:
With automatic hole collaring and percussion shutdown function after the drilling procedure completed plus 3 seconds delay to flush the hole bottom, the rig returns automatically to start mode. With AUTO shutdown protection function of the drifter and the rock drill tools, the rig will lubricate the drifter when rock drilling idle and when water flushing on. Advanced combo automatic anti-jamming system can adjust the rotation, feed and percussion pressure automatically according to the rock condition to ensure rock drilling operation always in optimum mode.
Intelligent Technology:
With CAN technology, modular layout of all electric system, and simplified circuitry increase reliability. The display panel in the canopy shows all drilling parameters and running state of the rig with automatic alarms and warnings, and data storage, to allow one man operation easy and trouble shootings simplified.

Product Features:
1. Feed: Heavy duty aluminum alloy feed beam with high anti-bending and torsion-resistant features and high corrosion proof assures long beam service life. The beam surface also is wrapped with stainless steel sheet and PTFE anti-wear lining applied between moving parts to further increase service life of the feed system.
2. Rock Drill: HF104M drifter with dual-damping system ensures best rock drilling tools service life. Pressurized oil film protects and lubricates all moving parts surface, decreasing interior wear of the drifter.
3. Safety Canopy: FOPS design for falling objects protection with lifting feature.
4. Large-capacity Cable Reel: Larger-capacity cable reel for 70 m travel without cable disassemble.
5. Positioning legs: Four heavy duty telescopic hydraulic legs for precise positioning and stability during drilling operation.
6. Console: Highly integrated System and one place layout design for easier, simpler and more convenient operation.
7. Braking system: Designed and developed specially for underground work environment - the dual braking system, besides front and rear axle wheel wet brakes, with front axle spindle wet brakes and rear axle closed hydraulic parking brakes and emergency shutdown brake added.

Product Parameters

HFJ21 Technical Specifications
Hole range	41-89 mm	Rod size					(R32, R38,T38) 3090 mm/3700 mm/4310 mm
Drilling depth	2830 mm/3440 mm/4050 mm	Maximum working area					35 m²
Drifter
model	HF104M	Hydraulic System Pressure					230 bar
Percussion Power	20 kw	Rotation Speed					0-388 rpm
Maximum Torque	752 N.m	Weight					170 kg
Percussion Frequency	60 Hz
Compressor
Pressure	8 bar	Capacity F.A.D					0.3 m³/min
Electric Motor
Model	GN13081501	Frequency					50 Hz
Power	55 kw	Votage					380 V
RPM	1475 r/min
Feed Mechanism
Total Length	4890 mm/5500 mm/6110 mm		Compensated Feeding length			1600 mm
Feeding length	2830 mm/3440 mm/4050 mm		Maximum Lifting Force			15 kn/19 kn
Boom
Parallel holding	Complete		Feed Swing Angle			±40°
Boom Extension	1200 mm		Feed Pitch Angle			+25°/-48°
Boom Swing Angle	±35°		Feed Angle			+3°/-90°
Boom Lifting Angle	+43°/-20°		Feed roll-over			360°(Spiral)
Chassis
Articulated Steering Angle	±41°		Approach and Departure Angles			15°
Hydraulic Support Legs	4		Fuel Tank Capacity			63 L
Model	4BTA3.9-C80-II		RPM			2200 r/min
Power	60 kw/(at 2200rpm)		Torque			380 N.m/(at 1500rpm)
Tramming Speed	12/4.5 km/h		Rear Axle Swing Angle			±10°
Maximum Traction Force	32 kn		Ground Clearance			260 mm
Climbing Angle	14°
Electric System
Start Type	Star / delta unloading start			Working Lights	2x40 W,24 V
Voltage	380 V			Tramming Lights	8x70 W,24 V
Battery	2x12 V,105 Ah			Cable Reel, Diameter	1100 mm
Water Flushing System
Flow	66 L/min			Minimum Water Inlet Pressure	2 bar
Pressure	12 bar			;	;
Weight and Dimensions
Weight	≤12000kg			Tramming Turning Radius	Inner R 2800 mm,Outer R 4900 mm
Dimensions ( L x W x H)	10920mmx1650 mmx2100 mm/2800 mm			Working Coverage Area : Width x Height	6600 mmx5670 mm(5600 mmx5390 mm)

Working Site

Company Profile

FAQ

1. Are you a trading company or a manufacturer?

We are a professional manufacturer. Our factory mainly produces water well drilling rigs, core drilling rigs, down-the-hole drilling rigs, pile drivers, etc. The products have been exported to hundreds of countries around the world and enjoy a high reputation all over the world.

2. How is the quality of your machine?
Our products pass strict quality inspections before they leave the factory to ensure that they are qualified before they are shipped.

3. How to inspect the goods?
1) Support customers to come to the factory for on-site inspection.
2) Support customers to designate third-party companies to inspect goods.
3) Support video inspection.

4. Do you have after-sales service?
Yes, we have a dedicated service team that will provide you with professional technical guidance. If you need, we can send our engineers to your workplace and provide training for your employees.

5. How about quality assurance?
We provide a one-year quality guarantee for the main machine of the machine.

6. How long is your delivery cycle?
1) In the case of stock, we can deliver the machine within 7 days.
2) Under standard production, we can deliver the machine within 15-20 days.
3) In the case of customization, we can deliver the machine within 20-25 days.